Prof.
H. Bülent Ertan
Oda No
C-101
Tel No
+90 (312) 210-2359
E-posta
ertan metu.edu.tr

Araştırma Konuları

  • Electrical Machines
    • Induction motors
    • Switched Reluctance motors
  • Power Electronics
    • High Frequency Power Supplies
  • Electrical Drives
    • Field Oriented Drives

Yayınlar

  1. Rasul Tarvirdilu Asl,  Reza Zeinali, H. Bülent Ertan, Yavuz Taner,   “PM BRUSHED DC MOTOR OPTIMIZATION”, ISEF 2015 - XVII International Symposium on Electromagnetic Fields          in Mechatronics, Electrical and Electronic Engineering Valencia, Spain, September 10-12, 2015
  2. H. Bülent Ertan, Gökmen Cengiz, “Problems encountered during transition to stand alone operation of grid connected wind turbines”, Jan 33 2015 İstanbul Gelişim Üniversitesi
  3. Raza Zeinali, H. Bülent Ertan,  “Evaluation of a 6 pole axial flux PM motor for Control Moment Gyroscope Application”,  ACEMP 2015, September 1-3 , Side, 978-1-4763-7239-8/15/$31.00 ' 2015 IEEE
  4. A. Hadj Dida, M. Bourahla], H. Bülent Ertan, M. Benghanem, M. E. Benzina , “Three phase Inverter Speed Control of AC Drives Motor using DSPic microcontroller”, ACEMP 2015, September 1-3 , Side, 978-1-4763-7239-8/15/$31.00 ' 2015 IEEE
  5. EEMKON 2015 Elektrik Elektronik Mühendisliği kongresi 19-21 Kasım 2015 20 KASIM 2015 CUMA / BARBAROS SALONU - B 10:00-12:00 ÜNİVERSİTE SANAYİ İLİŞKİLERİ Oturum Yöneticisi: Prof. Dr. Bülent Ertan (ODTÜ) Üniversite sanayi işbirliğinden beklentiler. http://www.eemkon2015.org/images/eemkon-2015-brosur.pdf
  6. Ertan H. B., Şener Y., Sinus Output 3-phase Inverter Toplogy for Improved Drive Efficiency. "International Power Electronics and Motion Control Conference and Exposition", CD, (2014).
  7. Ertan H. B., Çağan N., Outer Rotor Radial-Flux PM Motors for Control Moment Gyroscope Applications. "International Conference on Optimization of Electrical and Electronic Equipment",
  8. Ertan H. B., Çağan N., Comparison of Outer Rotor Radial Flux and Axial Flux PM Motors for CMG Application. "International COnference on Electrical Machines", (2014). (2014).
  9. Ertan H. B., Şener Y., 3-phase Sinusoidal Output Inverter Topology. "Third International Conference on Power Electronics and Electrical Drives", CD, (2014).
  10. Ertan, H. Bulent, and Ozan Keysan. "Implementation issues of real time position estimation for induction motors using rotor slot harmonics." Power Engineering, Energy and Electrical Drives (POWERENG), 2013 Fourth International Conference on. IEEE, 2013.
  11. Ozan Keysan, H.Bülent Ertan, “Real Time Speed & Position Estimation UsingRotor Slot Harmonics” IEEE Trans. Industrial Informatics, paper No: 10.1109/TII.2012.2210231 , 2013
  12. Ertan, H. B., and I. Sahin. "Evaluation of inductance measurement methods for PM machines." Electrical Machines (ICEM), 2012 XXth International Conference on. IEEE, 2012.
  13. Ertan, H. Bülent, E. Dogru, and A. Yilmaz. "Comparison of efficiency of two dc-to-ac converters for grid connected solar applications." Optimization of Electrical and Electronic Equipment (OPTIM), 2012 13th International Conference on. IEEE, 2012.
  14. H. Bulent Ertan, Emre Doğru, “A proposal for Improving Efficiency of Inverter Driven Electrical Motors” IEEE PES General Meeting July 2011
  15. H. Bulent Ertan, Kurtuluş Yılmaz, “Choice of Pole number of Two-Rotor Axial-Flux PM Motor for Control Moment Gyroscope”, IEEE ACEMP-ELECTROMOTION Joint Conference, İstanbul, September2011
  16. Ozan Keysan, H.Bülent Ertan “Speed Position Estimation by Demodulating Rotor Slot Harmonics”, XIX International Conference on Electrical Machines-ICEM 2010, 6 -8 September 2010, Rome, Paper no. 978-1-4244-4175-4.
  17. Ozan Keysan, H. Bülent Ertan, “Higher Order Rotor Slot Harmonics for Rotor Speed  Position Estimation”, 12th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2010, 20-22 May 2010,  pp. 416-421.
  18. Ozan Keysan , H. Bülent Ertan “Determination of Rotor Slot Number of an Induction Motor Using an External Search Coil”, Facta Universitatis. Series: Electronics and Energetics. Energy., vol. 22,  No :2  Publisher :University of NIS, Month :8 Year :2009, Yugoslavia, pp:227-234.  
  19. Ozan Keysan, H. Bülent Ertan, “Determination Of Rotor Slot Number Of An Induction Motor Using An External Search Coil”, 16th International Symposium on Electrical Apparatus and Technologies SIELA 2009, Vol:1 No:1 Publisher :Technical University of Sofia Editor(s) :Mintcho Mintchev, Pages :CD oral ses. 1 Month :6 Year :2009, Bulgaria, pp.227-234.
  20. Ozan Keysan, H. Bülent Ertan, “External Search Coil as a Means of Measuring Rotor Speed of an Induction Motor” ELECTROMOTION 2009, EPE "Electric Drives" Vol:1, Month :7 Year :2009, France, pp .OS-4. 
  21. Bülent Ertan H., Burak Yalçıner L., “An Analytical Approach for the Calculation of Flux-Linkage Including End-Effect for SR Motors”, IEEE SPEEDAM SYMPOSIUM 11-13 June 2008, ITALY, pp. 307-311
  22. Erdal Bizkevelci, Kemal Leblebicioğlu, H. Bülent Ertan, “A Novel Noise Reduction Technology for Switched Reluctance Motors” IEEE PES 20-24 July 2008 USA, Paper Number: PESGM2008-001651.PDF , Pittsburg, Pennsylvania, USA.
  23. H. BülentErtan, L. BurakYalçıner,“Performance Calculation of SR Motors for Optimum Design and a Washing Machine Application” ICEM’08, 6-9 Sept. 08, Portugal pp.1-6
  24. Baris Colak, H. Bulent Ertan, I. Ertan Murat, PCIM Europe 2007 International Exhibition & Conference on Power Electronics Intelligent Motion Power Quality “A new offline method for stator inductance detection for use in induction motor controllers” PCIM Europe 2007, 22-24 May 2007, Nurnberg, Germany,  pp.48
  25. H. Bulent Ertan, Ertan Murat, Baris Colak, IEEE International Electrical Machines and Drives Conference “A Novel Approach to Detection of Some Parameters of Induction Motors” IEMDC 2007, 3-5 May 2007, Antalya, Turkey pp. 1626-1631
  26.  H. Bülent Ertan, Volkan Sezgin, Baris Colak, The Seventh International Conference on Power Electronics and Systems “Detection of Some Parameters of Induction Motors a Proposal and Its Verification” PEDS’07, 27-30 Nov 2007, Bangkok, Thailand pp. 1337-1343
  27. İres İskender, Yıldırım Üçtuğ, H. Bülent Ertan “DSP microcontroller-based fuzzy control of a DC/DC parallel resonant converter using phase-shift PWM technique” COMPEL (The International Journal for Computation and Mathematics in Electrical and Engineering), November 4, 2006, pp.827-840
  28. H. Bülent Ertan, Çağlar Özyurt, Optimization of Electrical and Electronic Equipments OPTIM’06 “Prediction of Motor Speed For Low Cost Induction Motor Drives” OPTIM 2006 May, 18-19, 2006 Brasov, Romania pp.289-297
  29. Erdal Bizkevelci, Kemal Leblebicioğlu, H. Bülent Ertan “A Control Strategy For Noise Reduction In Switched Reluctance Motors” SAEM 2006 Macedonia-Polish Symposium on Applied Electromagnetic, SAEM 2006 June 8-10, 2006 Ohrid, Macedonia pp. 1-11
  30. H. Bülent Ertan, Cüneyt Karacan, Levent B. Yalçıner “Evaluation of Switched Reluctance Motor Drives for Wide Speed Range Drive Applictions” ICEM 2006 September 2-5, 2006 Chania, Crete Island, Greece pp.372  
  31. İres İskender, Yıldırım Üçtuğ, H. Bülent Ertan “ Steady-state modeling of a phase-shift PWM Parallel Resonant Converter” COMPEL (The International Journal for Computation and Mathematics in Electrical and Engineering), November 4, 2005, pp. 883-899
  32. H. Bülent Ertan, N. Balkan Şimşir; “Comparison of PWM and PFM Induction Drives Regarding Audible Noise and Vibration for Household Applications”, IEEE IAS, Dec. 2004, pp. 1621-1628.
  33. Cüneyt Karacan, H. Bülent Ertan; “Evaluation of a Radial Flux – Brushless DC Drive and an Induction Motor Drive for Washing Machine Applications” Electromotion, September 2005, No 2-3  pp.133-140
  34. H. Bülent Ertan, Çağlar H. Özyurt; “Prediction of Induction motor Parameters From Manufacturer’s Data” SIELA 2005, 2-3 June 2005 Plovdiv, Bulgaria,pp.1
  35. H. Bülent Ertan. Barış Çolak; “Design Issues And A Novel Approach For Measurement And Elimination Of Conducted Emi For An Induction Cooktop” ICEMC 2005, 23-31 July 2005, Phuket, Thailand, pp.1C2-1C3
  36. H. Bülent Ertan, Afşin Büyükbaş, Thomos Lipo, “A Method For The Calculation Of Core Losses Of A Sıx-phase Induction Motor” ISEF 2005 September 14-17 September 2005 Baiona, Vigo-Spain pp. ISBN 84-609-7057-4, EE-1.1 / EE-1.3
  37. H. Bülent Ertan, Bülent Dağ, Gerard Capolino; “Calculation of Parameters of Single Phase PM Motor for Design Optimization”, IEEE Trans. On Energy Conversion, Vol. 20, No. 3, September 2005, pp. 538-548.
  38. H. Bülent Ertan, Erdal Bayramlı, Özgür Gölgelioğlu; “Powder Metal Development for Electrical Motor Aplications”, Journal of Materials Processing Technology, 2005, pp.83-88
  39. Bülent Ertan, N. Balkan Şimşir; “Comparison of PWM and PFM Induction Drives Regarding Audible Noise and Vibration for Household Applications”; IEEE IAS, Dec. 2004,Volume 161, Issues 1-2, pp 84-88.
  40. H. Bülent Ertan, Erdal Bizkevelci, Levent B. Yalçıner; “Measurement and Prediction of Parameters of High Frequency Transformers” ARWtr 2004 Advanced Research Workshop on Modern Transformers, October 28-30 2004, Vigo – Spain, pp. 3-8.
  41. H.B. Ertan, C. Karacan; “Evaluation of Radial Flux BLDC and Induction Motor Drive for Washing Machine Applications”; ICEM 2004, 5-8 September 2004, Cracow – Poland, pp. 239-240.
  42. Erdal Bizkevelci, Kemal Leblebicioğlu, H. Bülent Ertan; “A Sliding Mode Controller To Minimize SRM Torque Ripple and Noise”; ISIE 2004, 4-7 May 2004, Ajaccio, France, pp1333-1338.
  43. Yılmaz, H.B. Ertan, K. Leblebicioğlu; “A Fuzzy Control System for Grid Connected Photovoltaic Energy Conversion”; ACEMP 2004, 26-28 May 2004; Istanbul, Turkey, pp. 402-407.
  44. Barış Çolak, H. Bülent Ertan; “A Unity Power Factor Induction Cooktop: Design Issues and a Novel Approach to Measurement and Elimination of Conducted EMI”; ACEMP 2004, 26-28 May 2004; Istanbul, Turkey, pp.146-152.
  45. H.B. Ertan, E. Bizkeelci, L.B. Yalçıner; “Measurement and Calculation of Leakage Inductance and Stray Capacitance of High-Frequency Transformers”; ELECTROMOTION 2003, November 26-28 2003; Marrakech, Morocco, pp.120-125.
  46. H. Bülent Ertan, Kemal Leblebicioğlu, Bülent Avenoğlu, Bahri Ercan; ICEMC 2003; “Identification Of Parameters of An Induction Motor From Field Solution”, 09-11 November 2003, Beijing, China pp.1-6
  47. H. Bülent Ertan, Bülent Dağ, Gerard Capolino, “Monofaze Sabit Mıknatıslı Motorların Bazı Parametrelerinin Tasarım Amacı ile Hesaplanması”; Eletrik-Elektronik Bilgisayar Mühendisliği 10. Ulusal Kongresi, 18-21 Eylül 2003, İstanbul Turkey, pp: 139-143.
  48. Barış Çolak, H. Bülent Ertan; “A Unity Power Factor Induction Cooktop: Design Issues and a Novel Approach for Measurement and Elimination of Conducted EMI”; Society Of Electrical and Electronic Engineers in Israel; 11 - 17 Haziran 2003; Eilat, Israel, pp. 1-7  
  49. Erdal Bayramlı, Özgür Gölgelioğlu, H. Bülent, Ertan; “Powder Metal Development for Electrical Motor Applications”; 3rd Japanese-Mediterranean Workshop on Applied Electromagnetic Engineering for Magnetic and Superconducting Materials & 3rd Workshop on Superconducting Flywheels, JAMPED’03, May 19 – 21, 2003; Athens, Greece, pp. 41-42.
  50. H.Bülent Ertan, Barış Çolak "A New Technique for Shortening the EMI Filter Design Stage" , IEEE International Conference on Electromagnetic Compatibility , May 2003 İstanbul, Turkey, pp.603-608.
  51. H. Bülent Ertan, Kemal Leblebicioğlu, Bülent Avenoğlu; “A Contribution to the Calculation of High Frequency Losses in Induction Motors” Spain, pp. 1.125 – 1.130
  52. H. Bülent Ertan, Hayrettin Can, Erhan Akin; “A New Integration Algorithm for Flux Estimation Using the Voltage Model” COMPEL, Vol. 21, No., 2, 2002, pp.135-140
  53. H. Bülent Ertan, Bülent Dağ, Gerard Capolino; "An Accurate Model for the Calculation of Some Parameters of Single-Phase Permanent Magnet Motors"; International Conference on Electrical Machines; 25-28 August 2002; Brugge - Belgium; Proceedings, pp.351-356
  54. Bülent Ertan, Barış Çolak; "A Study on Improvement of Conducted EMI from A Quasi-Resonant Inverter"; International Conference on Electromagnetic Compatibility; 24-26 July 2002 Bangkok - Thailand, pp.272-277
  55. H. Bülent Ertan, Bülent Dağ, Gerard Capolino; "Calculation of Some Parameters of Single Phase PM Motor for Design Optimization"; International Conference on Optimization of Electrical and Electronic Equipments; 16-17 May 2002; Braşov, Romania, pp. 351-356.
  56. H. Bülent Ertan, Cemil Yamalı; "Doğrudan şebekeye bağlı güneş pilli ve kombine güneş pilli güneş - elektrik dönüştürücü sistemlerin değerlendirilmesi"; Temiz Enerji Günleri; 1-3 Mayıs 2002 Muğla
  57. Ertan, H.B., Bizkevelci, E., Avenoğlu, B., “An Induction Motor Design Tool Combining Analytical and Field Solution Techniques” ICEMS 2001, 18-20 August 2001, Proceedings CD, Electrical Drives, Shenyang-China, pp.87-196
  58. Ertan, H.B., Bizkevelci, E., Avenoğlu, B., “An Induction Motor Design Tool Combining Analytical and Field Solution Techniques”, ISEF 2001, 20-22 September 2001, Cracow-Poland, pp.153-158
  59. Ertan, H.B., Daşdemir, B., “An Approach to Analysis and Design of Switched Reluctance Motors” ISEF 2001, 20-22 September 2001, Cracow-Poland, pp.19-34
  60. Ertan, H.B., Bizkevelci, E., Avenoğlu, B., “A Design Tool Utilizing Numerical Field Solution and Analytical Design and Optimization Techniques” AEGEAN Conference Electrical Machines and Power Electronics, ACEMP2001, 27-29 June 2001, Kuşadası-Turkey, pp.628-633
  61. Ertan, H. B., Leblebicioglu, K., Ozmener, M., Demirel, O., Bulatov, O., “Fuzzy Logic Control Scheme for Mains Synchronized Solar-Electrical Energy Conversion” Power Conversion Intelligent Motion Power Quality, PCIM 2000, 6-8 June 2000, Nurnber-Germany, pp.30-40
  62. Ertan, H. B., Camlıkaya, T., Demirel, O., “Software for Simulation and Controller Development for High Frequency High Voltage Power Supplies” The Third International Power Electronics and Motion Control Conference, IPEMC 2000, 15-18 Aug. 2000, Beijing-China, pp. 665-670
  63. Ertan, H.B., Leblebicioğlu, K., Demirel, O., “An Approach to Design and Optimization of HV High Frequency Resonant Power Transformers” International Conference on Electrical Machine, ICEM 2000, 28-30 August 2000, Espoo-Finland, pp. 183-187
  64. Şahin, F., Ertan H.B., Leblebicioğlu, K. “ Optimum Geometry for Torque Ripple Minimization of Switched Reluctance Motors”, IEEE Transactions on Energy Conversion, Vol. 15, No. 1, March 2000, pp. 30-40
  65. Ertan, H. B., Şimşir, N. Balkan., “Comparison of PWM and PFM Induction Drives Regarding Audible Noise and Vibration for Household Applications”, The 1999 IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives, IEEE SDEMPED’99, September 1-3, 1999, Gijon-Spain, pp. 33-40
  66. Ertan, H. B., Şimşir, B., “A Comparison of Torque Capabilities of Axial Flux and Radial Flux Type of Brushless DC (BLDC) Drives for Wide Speed Range Applications”, IEEE1999 International Conference on Power Electronics and Drive Systems, PEDS’99, July 1999, Hong Kong, pp. 719-724
  67. Ertan, H. B., “Prediction of Torque and Inductance Displacement Characteristics of Asymmetrically Slotted Variable-Reluctance Motors Using a Simplified Model for Numerical Field Solution”, IEEE Transactions on Magnetics Vol. 35 No. 5 September 1999, pp. 4247-4258.
  68. Çadırcı, I., Ermiş, M., Nalçacı, E., Ertan, H.B., Rahman, M., “A Solid State Direct On line Starter for Medium Voltage Induction Motors with Minimized Current and Torque Pulsations”, IEEE Transactions on Energy Conversion, Vol. 14, No. 3, September 1999, pp. 402-412
  69. Can., H., Akın, E., Ertan, H.B., “Sayısal İşaret İşlemci Kullanılarak Gerçekleştirilen Vektör Kontrolun Performans Değerlendirmesi”, Eletrik-Elektronik Bilgisayar Mühendisliği 8. Ulusal Kongresi, 1999, Gaziantep, pp.146-149
  70. Ertan, H. B, Şimşir, B., “A Pulse Frequency Modulated Drive For a Wide Speed Range Application”, PEDES’98 1998 International Conference on Power Electronics Drives and Energy Systems for Industrial Growth, 1-3 December 1998, Perth, Western Australia, pp.546-551.
  71. Ertan, H.B., Leblebicioğlu, K., Pirgaip, M., “High Frequency Loss Calculation In A Smooth Rotor Induction Motor Using FEM”, International Conference on Electrical Machines, Sept.2007, İstanbul, pp.566-575.
  72. Akın, E., Can, H., Ertan, H.B., Üçtuğ, Y., “Comparison of Integration Algorithms for Vector Control”, International Conference on Electrical Machines, ICEM’98, Sept. 2-4 1998, İstanbul, Vol. 3/3. pp. 1626-1631.
  73. Hamarat, S., Leblebicioğlu, K., Ertan, H.B., “Comparison of Deterministic and Non-deterministic Optimization Algorithms for Design Optimization of Electrical Machines”, International Conference on Electrical Machines, ICEM’98, Sept. 2-4 1998, İstanbul, Vol. 3/3. pp. 1477-1482.
  74. Leblebicioğlu, K., Ertan, H.B., Çekiç, A., “Prediction of Induction Motor Parameters From Numerical Field Solutions”, International Conference on Electrical Machines, Sept. 2-4 1999, İstanbul, pp. 4247-4255
  75. Ertan, H. B, Leblebicioğlu, K., Şimşir, B., Hamarat, S., Çekiç, A., Pirgaip M., “Design Optimization of Variable Frequency Driven Three Phase Inductions Motors”, COMPEL, The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, Vol. 17 No.1/2/3. 1998, MCB University Press, 0332-1649. pp. 135-140
  76. Ertan, H. B, Leblebicioğlu, K., Şimşir, B., Hamarat, S., Çekiç, A., Pirgaip M., “Design Opitmization Of Variable Frequency Driven Three Phase Inductions Motors”, International Symposium on Electromagnetic Fields in Electrical Engineering, Sep. 25-27 1997, Poland, pp.301-304.
  77. Şimşir, N. B., Ertan, H. B., “3 Fazlı Darbe Sıklık Modulasyonlu bir eviricinin tek bir mikro denetleyici kullanılarak uygulanması”, Elektrik -Elektronik Bilgisayar Mühendisliği 7. Ulusal Kongresi, 8-14 Eylül 1997, Ankara, pp.430-433.
  78. Ertan, H. B., Leblebicioğlu, K., Hamarat, S., “Çift Hızlı ve Değişken Frekansla Sürülen Asenkron Motorların Tasarım Optimizasyonu”, Eletrik-Elektronik Bilgisayar Mühendisliği 7. Ulusal Kongresi, 8-14 Eylül 1997, Ankara, pp. 434-437
  79. Ertan, H. B., Leblebicioğlu, K., Hamarat S., “Design of Double Speed and Variable Frequency Driven Induction Motors”, Electromotion, Vol. 4, No.1, January 1997, pp.38-43.
  80. F. Şahin, H. Bülent Ertan, K. Leblebicioğlu, “Optimum Geometry For Torque Ripple Minimization Of Switched Reluctance Motors”, International Conf. on Electrical Machines, 10-12 Eylül 1996, Vol 2, Vigo-Spain, pp 110-115
  81. Eskenderzadeh, H. Bülent Ertan, M. Yıldırım Üçtuğ, “A neurofuzzy Control Strategy for the converter circuit of an x ray tube”, PCIM Conference, 21-23 May 1996, Nurnberg  Almanya, Power Conversion Volume, pp 523-536.  
  82. F. Şahin, H. B. Ertan, K. Leblebicioğlu, “Optimum Geometry For Torque Ripple Minimization Of Switched Reluctance Motors”, ISEF’95 International Symposium Electromagnetic Field in Electrical Engineering, 25-27 September 1995, Greece, pp 2443-246.
  83. H. Karabudak, K. Leblebicioğlu, H. B. Ertan, “Application Of Fuzzy Control To Induction Heating Problem”, International Aegean Conference on Electrical Machines and Power Electronics, 5-7 June 1995, Kuşadası-Turkey, Vol.2/2, pp 650-655.
  84. N. B. Şimşir, H. B. Ertan, “The Implementation of A 3-Phase Frequency Modulated Inverter Using a Single microcontroller”, International Aegean Conference on Electrical Machines and Power Electronics, 5-7 June 1995, Kuşadası-Turkey, Vol.1 /2, pp. 100-106.
  85. E. Akın, B. Ertan, Y. Üçtuğ, “Hız Duyarsız Vektör Kontrol Algoritmalarında Gerilim Modelinin Uygulama Sorunları”, Elektrik Mühendisliği 6. Ulusal Kongresi, 11-17 Eylül 1995, Bursa, Cilt 1, pp.450-453.
  86. Erhan Akın., Bülent Ertan., Yıldırım Üçtug. "A Method For Stator Resistance Measurement Suitable For Vector Control" "Proc IECON'94" 5-9 Eylül 1994 bologna Italy. pp. 2122-2126
  87. Erbil Nalçacı., Ertan H. B. "A Field Orientation Scheme For Voltage Fed Induction Motor by Phase Angle Control With State Feedback" "Proc International Conference on Electrical Machines'94,  pp.72-77
  88. Erbil Nalçacı., Ertan H.B. "A field Orientation scheme for voltage Induction Motor With Closed Loop Phase Angle Control" "Proc Mediterranean Electro technical Conference'94" 12-14 Nisan 1994 Antalya-Türkiye, Cilt 2, pp. 801-805
  89. Ertan H.B., NATO ASI "Modern Electrical Drives"  "Proceedings of Papers Presented at poster Sessions", Şubat 1994, pp.1-740
  90. Ertan H. B., Aftahi, M. SPCAD a tool for computer aided design of single phase induction motors, IMACS TC 1-93 Proc.“Computational Aspects of Electromechanical Energy converters” 7-9 Jully 1993, Montreal Canada, pp.311-316.
  91. Safavi, A. Ertan H. B. "A microprocessor controlled switched Reluctance Motor Drive" Proc. Iranian Conference on Electrical Engineering May 18-21 1993 Tehran Iran. pp. 225-234.
  92. Aftahi, M. Ertan H. B. "A tool for performance Analysis of Single Phase Capacitor Induction Motors with computer", Proc. Iranian Conference on Electrical Engineering May 18-21 1993 Tehran Iran, pp.699-708.
  93. Ertan H.Bülent, Aftahi Mehdi. "Tek Fazlı Kapasitörlü Motorların Bilgisayar İle Analiz ve Tasarımı" Elektrik Mühendisligi 5. Ulusal Kongresi, Karadeniz Teknik Üniversitesi  13-18 Eylül 1993.
  94. Ermiş, M., Ertan,H. B., '' Various Induction Generator Schemes for Wind-Electricity Generation'', Electric Power systems Research, 23 July 1992, pp.71-83.
  95. Ermiş, M., Ertan, H.B.,  Akpınar, E., Ülgüt, F., ''Autonomous Wind Energy Conversion System With a Simple Controller Fclick to read this paper or Maximum Power Transfer'', IEE overseas premium award. IEE Proc., Part B, Vol 139, No 5 Sep.1992, pp. 421-428.
  96. Akın E, Ertan H. B. , Üçtug Y., '' Optimum Induction Generator Characteristics and Size for Grid Connected Wecs'', International conference on Electrical Machines, Manchester UK Sept. 1992, pp 853-857.
  97. H. Bülent Ertan, Muammer Ermiş, Sadeddin Alshelleh, "Optimum Induction Generator Characteristics and Size for Grid Connected Wecs", European Wind Energy Conference, Amsterdam, Ekim 1991, pp. 613- 617
  98. Akın Erhan, H. Bülent Ertan, M. Yıldırım Üçtug "An Indirect Method for Field Oriented Control of Induction Motor", Third  International Workshop on Microcomputer Control of Electric Drives, Mediterranean Institute of Technology, Marsilya, Fransa, 1-2 Temmuz 1991, pp. M-1-11.
  99. Akın Erhan, H. Bülent Ertan, M. Yıldırım Üçtug "Asenkron Motorların Denetiminde Akım ve Gerilim Ölçümüyle Alan Yönlendirme için Bir Yöntem", Bilkon'91, Bilkent Üniversitesi, Ankara, Temmuz 1991,
  100. Akın Erhan, H. Bülent Ertan, M. Yıldırım Üçtug, "Akım ve Gerilim Ölçümüyle Asenkron Motorda Alan Yönlendirme: Model ve Pratik Sorunlar", Elektrik Mühendisligi 4. Ulusal Kongresi, 9 Eylül Üniversitesi, İzmir, Eylül 1991,  pp.5.
  101. Ertan, H.B., Yagan, Ö. , Diriker, A., "Optimum Parameters for Doubly-Salient Motors Driven by A Voltage Source”, International Conference on Electrical Machines Boston, ABD, Eylül 1990, pp. 806-811.
  102. Ertan, H.B., Tandogan, V. Sinan "Senkron Alternatörlerde Sıcaklık Yükselmesinin Hesabı: Model Geliştirilmesi ve Uygulama ODTÜ Elektrik ve Elektronik Mühendisligi Bölümü 30. Yıl Sempozyumu”,  ODTÜ Ankara, 8-10 Şubat 1989, pp. 189-195.
  103. Ertan, H.B., Tandogan, V. Sinan "Senkron Alternatörlerde Sıcaklık Yükselmesinin Hesabı: Yöntem Seçimi ve Tanıtılması ODTÜ Elektrik ve Elektronik Mühendisligi Bölümü 30. Yıl Sempozyumu”, ODTÜ Ankara, 8-10 Şubat 1989, pp. 196-203.
  104. Ertan, H.B., Demirtürk, Yüksel, "Simulasyon Yazılımı Aracılıgıyla Endüksiyonla Eritme Amaçlı Evirgeç Tasarımı Elektrik Mühendisligi 3. Ulusal Kongresi   İTÜ İstanbul, 25-30 Eylül 1989, pp.3/1 186-189.
  105. Ertan, H.B., "Endüksiyonla Eritme Amaçlı Ocak ve Uyumlu Güç Kaynagı Tasarımı", Güç Elektronigi Semineri, KTÜ Trabzon, 16-22 Ekim 1989, pp.1-24.
  106. Ertan, H.B. , TandoŸan, V. Sinan "Senkron Alternatörlerde  Sıcaklık Yükselmesinin Hesabı: Model Geliştirilmesi ve Uygulama ODTÜ Elektrik ve Elektronik Mühendisligi Bölümü 30. Yıl Sempozyumu,   ODTÜ Ankara, 8-10 Şubat 1989, pp. 189-195 
  107. Ertan, H.B. , Tandogan, V. Sinan "Senkron Alternatörlerde Sıcaklık Yükselmesinin Hesabı: Yöntem Seçimi ve Tanıtılması” ODTÜ Elektrik ve Elektronik Mühendisligi Bölümü 30. Yıl Sempozyumu, ODTÜ Ankara, 8-10 Şubat 1989, pp. 196-203 
  108. Kukrer,O. T.  Ertan, H.B., " A Method for Voltage-Frequency Control of Inverters: Pulse Position Modulation, Internationals Conference Electrical Machines, Boston ABD, Eylül 1990, pp. 574-579.
  109. Kükrer O.T, Richardson J., Ertan H.B.; "A microcomputer based circuit for the generation of single phase optimized P.W.M. waveforms, Icem 1988, pp. 373-377.
  110. Ertan H.B., Tohumcu M.; "A method for optimum design of switched reluctance motors", June 1982, Turkey, Ankara,  pp. 551-555.
  111. Kükrer O.T., Ertan H.B., "An integral equation approach to the computation of nonlinear fields in electrical machines, IEEE Trans. on Magnetics. 24, No 4, July (1988), pp.1118-1124.
  112. Tohumcu M., Ertan H.B.; "Prediction of performance of swithched reluctance motor for design purposes", International Conference on Electrical Machines, September 1988, Pisa, Italy, Proc. Vol 2, pp. 557-561.
  113. Kükrer O.T., Richardson J., Ertan H.B.; "Closed loop control of a P.W.M. induction motor Drive system", Universities Power Engineering Conference 88, Trent Polytechnic, Nottingham, U.K. 20-22 September 1988, pp.1-5. 
  114. Ermiş, M., Ertan H.B., Akpınar, E., Ülgüt, F., "Design and Implementation of a Small Autonomous Wind Energy Conversion System", Proc. Fifth International Conference on Energy Options, Reading U.K. 7-9 April 1987, pp.111-114.
  115. Tohumcu M., Ertan H.B. , "Anahtarlı relüktans motorlu tahrik sistemlerinin yapıları ve temel özellikleri", 2. Ulusal Elektrik Mühendisligi Ulusal Kongresi, Ankara, 23- 25 Eylül 1987, pp. 735-738.  
  116. Ertan H.B., Tohumcu M. , "Anahtarlı relüktans motorlarının hız egrilerinin denetimi", 2. Ulusal Elektrik Mühendisligi Ulusal Kongresi, Ankara, 23-25 Eylül 1987, pp. 739-742.
  117. Tohumcu M., Ertan H.B., "Anahtarlı relüktans motorlarının performansının tasarım amacıyla hesaplanması", 2. Ulual Elektrik Mühendisligi Ulusal Kongresi, Ankara, 23- 25 Eylül 1987. pp. 743-746
  118. Kükrer O.T., Ertan H.B., "Evirgeç frekans gerilim denetiminde bir yöntem: Darbe yerleştirme modülasyonu",1987,  pp. 700-730.
  119. Ermiş, M., Ertan  H.B. , Demirekler, M. , Sarıbatur, B. , Üçtug, Y. , Sezer, E. , "The Use of Induction Generators in Wind Energy Conversion Systems", Prc. 13th World Energy Conference,  Cannes, France,  1-22, October 1986, pp.1- 23,
  120. Ertan H.B., "Analytical Prediction of Torque and Permeance- Displacement Characteristics of Asymmetrical Tooth Pairs," Proc. International Conference on Electrical Machines, Munih, Almanya, 8-9-10 Eylül 1986. pp. 97-100.
  121. Ertan, H.B., "Analytical Prediction of Torque and Inductance Characteristics of Identically Slotted Doubly- Salient Reluctance Motors", IEE Proc. Pt B, 133, No.4, (1986),  pp. 230- 236.  
  122. Ergül F.R., Ertan H.B. , "Takım tezgahlarında mikroişlemci ve adım motoru uygulamaları", Teknoloji 2. Milli Kongresi Ankara 6-7 Mayıs 1986  pp. 89-104.
  123. Ertan H.B.  , "Çagdaş degişken hızlı tahrik sistemleri", 2. Ulasal Makina Tasarım ve İmalat Kongresi, 17-19 Eylül 1986, pp. 327-337.  
  124. Tohumcu M., Ertan H.B., "Çift taraflı çıkık kutuplu magnetik yapılarda momenti denetleyen parametreler ve optimum boyutlar", 1. Ulusal Elektrik Mühendisligi Sempozyumu, Adana, Eylül 1985, pp. 595-602.
  125. Ertan H.B., "Asimetrik Çift taraflı çıkık kutuplu magnetik yapılarda kuvvet ve endüktansın Analitik olarak hesaplanması için bir yöntem" June 1982, Türkey, pp. 587-594.
  126. Ertan H.B., Ermiş M., Akpınar E., "Rüzgardan Elektrik Enerjisi üreten bağımsız bir güç kaynagı için optimum alternatör tasarımı", pp, 364-371.
  127. Ertan H.B., Ermiş M., Ertaş A. , Özay N. , "Ark ocagı içeren elektrik sistemlerinde kompanzasyon I: ocakların kompanzasyon gereksiminin belirlenmesi ve kompansatör tasarımı", pp.308-315.
  128. Ertan H.B., Ermiş M., Ertaş A., Özay N. , "Ark ocağı içeren elektrik sistemlerinde kompanzasyon II: Rezonansa neden olan  harmoniklerin  ölçümü ve kompanzasyon filtrelerinin  tasarımı", pp. 316-324.
  129. Dalgıç A., Ertan H.B., Güran C.H. , "Bir takım tezgahının Mikrobilgisayarla Kontrolu üzerine   bir çalışma", 3. Ulusal Otomatik Kontrol Sempozyumu, İstanbul, 28-30 Kasım 1984, Turkey  
  130. H. Bülent Ertan; "Prediction of torque and inductance- displacement  curves of   single stack VR stepping motors using numerical  field solutions", International Conference on Electrical Machines, 18-21 September 1984, Laussanne, Switzerland Proc. Part 1, pp.126-129,
  131. O. Tahsin, H. Bülent Ertan; "An Integral Equation Formulation for  Electrical Machine Field Analysis", Proc. International Conference on Electrical Machines, September 1984, Laussanne, Switzerland. Proc. Part 1, pp.165-168
  132. Dalgıç A., Ertan H.B., Güran C.H., "Bir takım tezgahının Mikrobilgisayarla Kontroluyla ilgili bir çalışma",  5. Ulusal Bilişim Kurultayı 8-10 Ekim 1984, İstanbul, Turkey.
  133. Ertan H.B. , "Prediction of torque and inductance- displacement  curves of   single stack VR stepping motors using numerical  field solutions",   International Conference on Electrical Machines,  18-21 September 1984,  Laussanne, Switzerland Proc. Part 1, 126-129.
  134. Tahsin O., Ertan H.B., "An Integral Equation Formulation for  Electrical Machine Field Analysis", Proc. International Conference on Electrical Machines, September 1984, Laussanne, Switzerland. Proc. Part 1, 165-168.
  135. Ertan H.B., "Makina tasarımında üç fazlı asenkron motorların seçimi", 1. Ulusal Makina Tasar›m ve İmalat Kongresi ODTÜ, Ankara, 19-21 Eylül 1984, pp. 23-35.
  136. Ertan H.B. , Sarıbatur B., Akpınar E.,  "Optimum senkron alternatör tasarımı için hızlı yakınsayan bir yöntem", 1983 yılında Türkiye'de Elektrik ve Elektronik Endüstrisi Sempozyumu,  İstanbul, Eylül 1983, pp. MAG- E 81 1-14.
  137. Tahsin O., Ertan H. B. , "Numerical solutıon of electric machine fields using magnetization integral equation", 2 nd International  Symposium  on Antennas, Propagation, Microwaves and  Electromagnetic Theory, ODTÜ, Ankara, November 1983, pp. 341-360.
  138. Ertan B., Sarıbatur B., "An efficient method for design optimizatin of synchronous generators",    International Conference on Electrical Machines, Budapest, Hungary, September 1982. pp. 2 412 – 415.
  139. Ertan B., Sarıbatur B., "A method for optimum design for synchronous generators on small computer systems", IFAC Workshop on Computer Aided Design of Projects and Development Policies, Ankara, June 1982, pp.  343- 364.
  140. Ertan H.B., "Introduction to an accurate analytical method for predicting the static  torque curve of saturated VR multiple stack stepping motors", 10th Annual Symposium on Incremental Motion Control Systems and Devices,  University of Illinois,  June 1981, pp. 41-46.
  141. Ertan B., Bilgin K., "Çok katlı degişken relüktans motorlarında moment-konum karakteristiginin hesabı", TUBİTAK VII. Bilim Kongresi, Ekim 1980.
  142. Ertan B., Aykanat C., "Optimum asenkron motor tasarımı için bir method", TUBİTAK VII. Bilim Kongresi, Ekim 1980.
  143. Ertan B. , Aykanat C., "A new approach to optimized design of induction motors", International Conference on Electrical Machines,  Athens, September 1980, pp.1784-1794.
  144. Ertan H.B. , Hughes A. , Lawrenson P.J. ,  "Efficient numerical method for predicting the torque- displacement curve of saturated VR stepping motors", IEE Proc. Vol. 127, Pt.B,  No.4, 1980, pp. 246-252.
  145. Ertan H.B.,Hughes A. , Lawrenson P.J. , Harris M.R. ,   "A new approach to the prediction of  static  torque curve of saturated VR stepping motors", 8th Annual Symposium on Incremental Motion Control Systems and Devices, May 1979, pp. 169-179.
  146. Harris M.R. , Andjargholi V., Lawrenson P.J. , Hughes A. , Ertan B., "Unifying approach to the static torque of stepping motor structures", Proc. IEE, 124, No.12,     5 th. October 1977, pp.1215-1224.  
  147. Harris M.R. , Andjargholi V., Lawrenson P.J. , Hughes A. , Ertan B., "Static torque in PM and VR  stepping motors a comparative review", IEE Conference on Small Electrical Machines, IEE publication No.136, March 1976, proceedings 100-107.
  148. Harris M.R. , Andjargholi V., Lawrenson P.J. , Hughes A. , Ertan B., "Limitations  on reluctance torque in doubly-salient structures, Proceedings of the International Conference on  Stepping Motors and Systems", the University of Leeds   July 1974,  pp. 158-169.
  149. Harris M.R. , Andjargholi V., Lawrenson P.J. , Hughes A. , Ertan B., "Limitations  on specific torque in stepping motors", 3rd Annual Symposium on Incremental Motion Control Systems and Devices, University of Illinois.  May 1974, proceedings paper pp. 158-168

 

Patents

  1. H. Civelekoğlu, R. Eraksoy, M. Ermiş, H.B. Ertan, I Çadırcı, A. Etiz, B. Özpineci, S. Verma, G. H. Turan, O. Karavelioğlu,“.Motor Drive for Diesel Electric Locomotives”, WO0074225, 7 Dec. 2000.
  2.  R. Eraksoy, H. B. Ertan, M. Ermiş, I.Çadırcı, T. Gülsoy, “Alternating current Drive for Electrical Multiple Units”, WO0073100, 7 Dec. 2000
  3.  H.B. Ertan, B. Çolak, Induction Cooktop, TR0300047, WO/2004/107819, 28 May 2003.
  4. Speed and Rotor Position Estimation of Electrical Machines Using Rotor Slot Harmonics or Higher Order Rotor Slot Harmonics. PCT/TR2010/000070, WO2011/26462, 2011
  5. Power Level Waveform Generation Method and System, USA patent No: US 9,276,487 B2, March 1 2016

 

Books

  1. Ertan, Üçtuğ, Consoli, Colyer "Modern Electrical Drives" NATO ASI series Kluwer Publishing Holland 2000.
  2. Lopez-Fernandez, Ertan, Turowski, “ Transformers: Analysis, Design and Measurement”, CRC Press, 2012
     

Projeler

INDUSTRY FUNDED PROJECTS - UYGULAMALI ARAŞTIRMALAR PROJELERİ

  1. 5-10 kVA prototip senkron üreteç geliştirilmesi için teknik danışmanlık, Haziran-Aralık 1979, 79-04-01-02.
  2. 10-20 kVA prototip senkron üreteç geliştirilmesi için teknikdanışmanlık, Mart-Agustos 1980, 80-04-01-01.
  3. 15-20 kVA prototip senkron üreteç geliştirilmesi için teknik danışmanlık, Kasım 1980-Nisan 1981, 80-04-01-04.
  4. 2000 kVA dagıtım panosu problemlerinin çözümü için teknik danışmanlık, Mayıs 1981, 81-04-01-02. (Dr. Mirzahan Hızal ile).
  5. Saç güç kaybı ölçümü için 'Epstein Square' cihazı tasarım ve imalatı Agustos-Ekim 1981, 81-04-01-06.
  6. 25-50 kVA Senkron üreteç geliştirilmesi ve çeşitli motor üretimi için teknik danışmanlık, Eylül 1981, 81-04-01-07.
  7. 25-50 kVA Senkron üreteç imali ve çeşitli motor üretimi için teknik danışmanlık II, Mart 1982, 82-04-01-02.
  8. M.K.E. Kırıkkale tesislerinde enerji tasarrufu ve Reaktif Güç Kompanzasyonu,Ekim 1983, 83-04-02-01. Energy Efficiency and Reactive Power Compansation at M.K.E. Factories, October 1983.
  9. Rüzgardan Elektrik Enerjisi üretimi için bagımsız bir sistem geliştirilmesi, Eylül 1983, 83-04-01-04. Development of an Autonomous Wind-Energy Conversion Unit. September 1983              
  10. Bor araştırma merkezi kurulması projesi,1984, 84-03-05-01-11.BOR Research Center Development, 1984  
  11. Türkiye Demir Çelik İşletmeleri egitim projesi, 1985, 85-03-01-07.
  12. Özel elektrojen grubu testi, Temmuz 1986, 86-03-01-11.
  13. Telsizle uzaktan kumandalı ikaz alarm sistemi kurulması için, Sivil Savunma Genel Müdürlügüne teknik danışmanlık hizmeti verilmesi, 1986, 86-03-01-09.Consultancy for Development of Remote Controlled Wireless Alarm System for Civil Defence Autohority
  14. Emek Holding'e kuru tip transformatör tasar›m› konusunda teknik danışmanlık Ocak 1987, 87-03-01-01.Development of Dry Power Transformers for EMEK Co.
  15. Telsizle uzaktan kumandalı ikaz alarm sistemi kurulması için, Sivil Savunma Genel Müdürlügüne teknik danışmanlık hizmeti verilmesi, Ekim 1987, 87-03-01-01.                   
  16. Bor araştırma merkezi kurulması projesi, Mart 1987, 87-03-05-01-02
  17. ECS AŞ'ye teknik danışmanlık, Temmuz 1988, 88-03-01-17
  18. İsdemir çapak çukuru motorları için statik tristörlü A.A. anahtar geliştirilmesi Şubat 1989, 89-03-01-02 Development of A.C. Static Starters for Waste Water Wells at Isdemir Steel Works
  19. İskenderun Demir Çelik İşletmelerine teknik danışmanlık Ocak 1990, 90-03-01-01
  20. Monofaze asenkron motor tasarımı yazılımı Ocak 1991, 90-03-01-34 Development of Design Software for Single Phase A.C. Motors
  21. Trifaze asenkron motor tasarımı ve optimizasyon yazılımı Ocak 1992, 91-03-01-50 Development of Design Software for Three Phase A.C. Motors
  22. TEE AŞ'ye Teknik Danışmanlık Haziran 1993-1999, 93-03-001-20 Technical Consultancy for T.E.E. Co.
  23. Yüksek Performanslı Asenkron Motor Serisi İçin Teknolojik Gelişme 1/1/96 - 1/1/98  97-03-01-23 (Alarko A.Ş. Development of High Performance Motor Series for ALARKO Co
  24. Bilten ve Aselsan’a Teknik Danışmanlık 1/9/1997 - 31/1/1998  Agüdos - 97-03-01-32
  25. Güç Elektroniği ve Radyoloji Lab. Geliştirilmesi, Mayıs 1997, Eylül 2001 AFP-03-01-96K121600 Power Electronics and Rdiolay Laboratory Development
  26. Pişirme Amaçlı Endüksiyon Ocağı Sürücü Geliştirilmesi (KOMSA A.Ş-TÜBİTAK BİLTEN) 7001302D( 2000-2001)Development of an Induction Cooker
  27. High Frequency X-Ray Power Supply 7971330D (TÜBİTAK BİLTEN) Development of High Frequency X-ray Power Supply 1997-2000
  28. Pişirme Amaçlı Endüksiyon Ocağı için Endüstriyel Tasarım (KOMSA A.Ş. – TÜBİTAK BİLTEN) 7031302, (2002-2003) Industrial Design for an Induction Cooker
  29. Çamaşır Makinesi için Asenkron Motor Denetleyicisi Geliştirilmesi Projesi (KAREL A.Ş.–TÜBİTAK BİLTEN) 7031303, (Ocak 2004-2005)Development of an Asynchronous Motor Drive for Washing Machines
  30. Mobil Radyoloji Ünitesi Geliştirilmesi, (Temmuz 2004-2006) (KANIT KİMYA– TÜBİTAK BİLTEN) 7041301 Development of a Mobile Radiology Unit
  31. Fırçasız Servo DC Motor (FSDM) Geliştirilmesi Projesi, (Ocak 2006-2008) (ASELSAN – TÜBİTAK UZAY) 7061301
  32. Köyceğiz Dalyan Özel Çevre Koruma Bölgesi Dalyan Kanallarında Seyreden Tekneler için Yenilenebilir Enerji Tabanlı Tahrik Sistemi, Özel Çevre Koruma Kurulu, Mayıs -Temmuz 2009.

RESEARCH FUND PROJECTS - ARAŞTIRMA FONU VE DPT PROJELERİ

  1. Mikroişlemci denetimli programlanabilir adım motoru sürücüsü geliştirilmesi, Temmuz 1985, AFP 85-03-01-02. Development of a Microprocessor Controlled Stepping Motor Drive
  2. Adım motoru test düzeni geliştirilmesi, Temmuz 1986, AFP 86- 03-01-02. Development of a Testing Unit for Stepping Motors
  3. Elektronik devre simulasyonu yazılımı aracılıgıyla orta frekans evirgeç tasarımı I, Temmuz 1988, AFP 88-03-01-02 Design of a Medium Frequency Inverter
  4. Elektronik devre simulasyonu yazılımı aracılıgıyla orta frekans evirgeç tasarımı II, Temmuz 1989, AFP 88-03-01-03
  5. Darbe konumu yerleştirme modülasyonlu evirgeç geliştirilmesi Nisan 1990- Nisan 1991, AFP 91-03-01-03 Development of an Inverter with Pulse Position Modulation
  6. Darbe konumu yerleştirme modülasyonlu evirgeç geliştirilmesi II Haziran 1991- Mayıs 1992, AFP 91-03-01-02
  7. Mikro işlemci Denetimli Sürücü Karakteristiği Ölçme Sistemi 1/7/1997 - 1/10/1998 AFP(328)-97-03-01-02
  8. Yeni Bir Alan Yönlendirme Yöntemine Otomatik Parametre Ölçme ve Düşük Hızda Çalışma Özelliği Kazandırılması 10 / 1996 - 10 / 1998 Tübitak-eeeag197 Low Speed Operation Capability for a New Field Orientation Algorithm
  9. Güç Elektroniği ve Radyoloji Lab. Geliştirilmesi  (01/5/1997 - 1/5/1999  AFP-03-01-DPT-96K121600 Power Electronics and Radiology Laboratory Development
  10. Mikro işlemci Denetimli Sürücü Karakteristiği Ölçüme Sistemi, Temmuz 1997, Eylül 2001, AFP (328)-98-03-01-02 Development of a Microprocessor Controlled Motor Test System
  11. Mikroişlemci Denetimli Sabit Mıknatıslı Motor Sürücüsü Geliştirme 01/01/2002 BAP-2002-07-02-00-75 Development of a Motor Drive for Permanent Magnet Motors
  12. Eksenel Akı Sabit Mıknatıslı Motor Performansının Göreceli Değerlendirilmesi 01/01/2002 BAP-2002-07-02-00-74 Comparative Assesment of Axial Flux PM Motors
  13. Yüksek Performanslı Orta Frekans Elektrik Motoru Uygulamaları için Yumuşak Toz Manyetik Kompozit Malzemeler, AFP06-07-DPT-99K120510  Development of Soft Composite Metal Material for Medium Frequency Electrical Motor Applications, 1999.

INTERNATIONAL PROJECTS - ULUSLARARASI PROJELER

  1. Science and Technology Project – Power Electronics & Development. of Radiology Laboratory – Project Number: 00015047  (Tur 92/004/F/01/99), 1997-2000
  2. Mains Synchronised Low Cost Solar Conversion For Household Applications, 10/1996 - 10/1998 NATO No.960339
  3. Modern Electrical Drives, Advanced Study Institute Organizer, NATO Project, Feb. 1994

APPLIED RESEARCH PROJECTS (TUBITAK)

  1. Moment Salınımı ve İşitsel Görüntüsü Azaltılmış Anahtarlamalı Relüktans Motor Denetleyici ve Sürücü Geliştirilmesi (ARMODEN) 01/07/2006-2008 TÜBİTAK, 106E033
  2. Düzgün Sinüs Çıkış Elde Etmek için Yeni Bir Güç Katı Topolojisi ve Kontrol Yöntemi, 01/10/2005-2008 TÜBİTAK-105E053

 

 

Ödüller ve Başarılar

  1. IEEE Trial Guide for Testing Permanent Magnet Machines, Working Group Recognition Award, 2013  
  2. TTGV Akın Çakmakcı Üniversite –Sanayi İşbirliğinde En Başarışı Tez Ödülü, 2001
  3. The Institution of Electrical Engineers. UK Overseas Premium Award, 1993

Tez / Araştırma Bilgileri

PhD. Thesis

  1. Müjdat Tohumcu; “Optimum Design of Switching Reluctance Motors”, METU, June 1985.
  2. Osman Kükrer; “New Algorithms and Techniques for Microprocessor – Controlled PWM Induction Drives”, METU, July 1987.
  3. Erhan Akın; " Stator Akısı üzerinden asenkron motorun rotor akısı alan yönlendirmesi için bir yöntem”, Fırat Üniversitesi 1994.
  4. Erbil Nalçacı; “An Investigation on Phase Angle Vector Control for Three Phase Induction Motors”, METU, September 1996
  5. Iraj Eskenderzadeh; “Design and Control of a Phase-Shift Resonant Converter for an X-Ray Generator”, METU, December 1996.
  6. Erdal Bizkevelci; “A Control Algorithm to Minimize Torque Ripple and Acoustic Noise of Switched Reluctance Motors”, METU, June 2008

M.Sc. Thesis

  1. Kemal Bilgin ; "Prediction of Static Torque Characteristics of Variable Reluctance multi stack Stepping Motors", MS Thesis, METU, April 1980.
  2. Cevdet Aykanat; "A new approach to optimized design of induction motors", MS Thesis, METU, August 1980.
  3. Osman Tahsin; "An Integral Equation Formulation for the    solution of  synchronous Machine Fields", MS Thesis, METU, February  1982.
  4. Şenol Bektaş; "A finite difference program for investigation of forces in doubly salient  structures", MS Thesis, METU, February 1982.
  5. Behçet Melih Sarıbatur; "A method for optimum design of salient pole synchronous generators", MS Thesis, METU, March 1982.
  6. Mehmet Özdeşlik; "Programmable step motor drive", MS Thesis, METU, September 1982.
  7. Selim Plevne Tanışık; "A finite element program for magnetic field solution", MS Thesis, METU, October 1982.
  8. Vedat Sinan Tandogan; "Prediction of steady state temperature distribution of electrical machines", MS Thesis, METU, November 1982.
  9. Aykut Dalgıç; "Microcomputer control of linear motion of a lathe cutting tool”, MS Thesis, METU, September 1983.
  10. Eyüp Akpınar; "Optimum design of multi-pole synchronous generators", MS Thesis, METU, June 1984.
  11. Sadettin Alshelleh; "Optimum characteristics of a grid connected squirrel cage induction generator driven by a wind turbine", MS Thesis, METU, March 1986.
  12. Hüseyin Altan;   "Microcomputer controlled stepping motor drive", MS Thesis, METU, May 1986.
  13. Levent Dinçer; "Simple inverter configuration for induction machine speed control", MS Thesis, METU, September 1987.
  14. Ahmet Diriker; "Optimum parameters of a symmetrically slotted sutructures", MS Thesis, METU, MS Thesis, METU, December 1987.
  15. Necip Beşenek; "Numerically Calculated force and permeance data doubly-salient magnetic geometries", MS Thesis, METU, December 1987.
  16. Yüksel Demirtürk, "Design and Spice Simulation of a Thyristorized Medium Frequency Current Fed Inverter", MS Thesis, METU, April 1989.
  17. Serdar Şentürk, "A Transistorized Swittched Reluctance Motor Drive", MS Thesis, METU, June 1989
  18. Ömer Faruk Yagan, “A New Approach to the Design Optimization of Switched Reluctance Motors", MS Thesis, METU, September 1990.
  19. Kemal Atavi, "Inverter Design for Maximum Power Transfer in Induction Heating”, MS Thesis, METU, February 1991.
  20. Mahfujur Rahman, “A 6-3 KV Thyristorized Switch for Direct-on Starting of Induction Motors”, MS Thesis, METU, September 1991.
  21. Mehdi Aftahi, “Computer Aided Design of Single- Phase Capacitor- Type Induction Motors”, MS Thesis, METU, January 1993.
  22. Çetin Başyigit, '' Operation Characteristics of Pole Amplitude Modulated Induction Generator Driven by a Wind Turbine”, MS Thesis, METU, March 1993.
  23. Metin Ayan, "Asynchronous Harmonic Torque Effects on the Torque Speed curve of the squirrel cage Induction Motor”, MS Thesis, METU, February 1994.
  24. Savaş Mutlu, " Zero Voltage Switching Pulse Frequency Modulated Inverter”, MS Thesis, METU, February 1994.
  25. N. B. Şimşir, “A Compact PFM Controller-converter With Wide Speed Range for 3-Phase Induction Motor”, MS Thesis, METU, September 1994.
  26. Funda Şahin, “Optimum Geometry for Torque Ripple Minimization of Switched Reluctance Motors”, MS Thesis, METU, January 1996.
  27. Serdar Hamarat, “Design Optimization of Three Phase Induction Motors”, MS Thesis, METU, Jan. 1997.
  28. Anıl Çekiç, “Determination of Equivalent Circuit Parameters of Three Phase Induction Machines with Finite Elements”, MS Thesis, METU, September 1998.
  29. Murat Pirgaip, “Computation of Core Losses in 3 Phase Smooth-Rotor Induction Motors Using Finite Element Method, MS Thesis, METU, September 1998.
  30. Hayrettin Can, “Implementation of Vector Control for Induction Motor Drives”, MS Thesis, METU, January 1999.
  31. Okan Demirel, “Temel Radyoloji Ünitesi için Yüksek Frekanslı Rezonans trafosu tasarımı Test Edilmesi ve Eniyilenmesi”, Hacettepe Üniversitesi, Ekim 1999.
  32. Tolga Çamlıkaya, “Fuzzy Control of Resonant Inverter Circuit for X-Ray Power Supply”, MS Thesis, METU, January 1999.
  33. Hasan Kavaklı, “A study on Evaluation of Direct and Field Orientation Control of Induction Machines”, MS Thesis, METU, December 2000.
  34. Bülent Avenoğlu, “İndüksiyon Motorlarında Yüksek Frekans Kayıplarının ve Motor Parametrelerinin Hesaplanması”, MS Thesis, METU, 2001
  35. Metin Akın, Bir Vektör Kontrol Yönteminin Uygulama Hız Sınırlarının Genişletilmesi için Yöntem Geliştirme”, MS Thesis, METU, 2002.
  36. İ. Ertan Murat, “Self Commissioning and Online Parameter Identification of Induction Motors” MS Thesis, METU. April 2002.
  37. Bülent Dağ, “Performance Calculation of Single Phase Permanent Magnet Synchronous Motors for Design Optimization”, MS Thesis, METU. April 2002
  38. Barış Çolak, “A Unity Power Factor Resonant Inverter with Single Transistor for Induction Cooking”, MS Thesis, METU. April 2002.
  39. Arif Yılmaz, “A Control System for Mains Synchronized Solar-Electric Converter”, MS Thesis, METU. December 2002.
  40. Tolga İnan, “Four Quadrant Computer Based Motor Test System Development” MS Thesis, METU .August 2003.
  41. Afşin Büyükbaş, “Calculation of Core Losses of a Six-Phase Induction Motor with Third Harmonic Current Injection”, MS Thesis, METU. January 2004.
  42. Serkan Paki Şedele, “A Novel Approach for Synthesising Sinus Waveforms at Power Level”, MS Thesis, METU. January 2004.
  43. Akın Acar, “Implementation of a Vector Controlled Induction Motor Drive”, MS Thesis, METU. January 2004.
  44. Levent Burak Yalçıner, “A Software for Analysis and Design Optimization of Switched Reluctance Motor” MS Thesis, METU. April 2004.
  45. Cüneyt Karacan, “Comparison of Performance of Switched Reluctance Motors, Induction Motors and Permanent Magnet DC Motors”, MS Thesis, METU. April 2004.
  46. Çağlar Hakkı Özyurt “Parameter and Speed Estimation Of Induction Motors From Manufacturers Data And Measurements” MS Thesis, METU. January 2005.
  47. Murat Tunç; A Single Transistor Unity Power Factor Rectifier”, MS Thesis, METU. Ankara, 2007.
  48. İbrahim Kaya; “A Switch Mode Power Supply for Producing Half-Wave Sine Output”, MS Thesis, METU .Ankara, 2008.
  49. Yılmaz Göynük; “Development of an Electrical Machine Analysis and Optimum Design Software Package”, MS Thesis, METU. June 2008.
  50. Ozan Keysan; “A Non-Invasive Speed and Position Sensor for Induction Machines Using External Search Coils”, MS Thesis, METU. December-2008.
  51. Volkan Sezgin; “A Novel Algorithm for Prediction Off-Line Stator Leakage Inductance and On-Line Stator Resistance of Induction Motors”, MS Thesis, METU January-2009
  52. Ibrahim  Mahariq, A Normalized Set of Force and Permeance Data for Doubly-salient Magnetic Geometries, April 2009 University Conferring the Degree: METU, Turkey
  53. Kurtuluş Yılmaz, “Comparison Of Axial Flux and Radial Flux Brushless DC Motor Topologies For Control Moment Gyroscope Wheel Applications” MS Thesis, METU. Month: 4Year: 2009
  54. İlker Şahin, “Measurement of Brushless DC Motor Characteristics and Parameted and Brushless DC Motor Design” MS Thesis, METU. Jan 2010
  55. Mustafa İzgüden, “Design Software Development for Induction Motors”, MS Thesis, METU. May 2011.
  56. Gökmen Cengiz, “Development of a hardware in the loop wind energy conversion system emulator”, MS Thesis, METU. February 2015
  57. Murat Kayhan, “The effect of DC link filter design and compansation on dynamic performance of a vector ontrolled Drive”, MS Thesis, METU. February 2015
  58. Necati Çağan, “Design of Outer Rotor Brushless DC Motor for Control Moment Gyroscope”,  MS Thesis, METU. Feb 2015
  59. Yunus Şener, “Design and Implementation of Variable Frequency Sine Wave Output Buck-Boost Inverter”, MS Thesis, METU. February 2016
  60. Tayfun Filci “Prediction of Rotor Position from Stator Slot Harmonics Existing in Stator Current” MS Thesis, February 2016.
  61. Reza Zeinali, “Design and Optimization of High Torque Density Generator for Direct Drive Wind Turbine Applications”, MS Thesis, METU. September 2016
  62. Rasul Tarvirdilu, “Optimum Pole Combination to Maximize Torque Density in Switched Reluctance Motors for Electric Vehicle Applications”, MS Thesis, METU. August 2016

Biyografi

Academic Experience

1988-present    Professor    Electrical &  Electronics Eng.     METU
1983-1988        Assoc. Prof.    Electrical &  Electronics Eng.     METU
1979-1983        Asst. Prof.    Electrical &  Electronics Eng.     METU
1978                 Lecturer    Electrical &  Electronics Eng.     METU

Managerial Experience

2011-2014    Assistant Chair, IEEE “Guide for testing permanent magnet machines” working group,     IEEE
2012-2016    Chair METU Dormitories board     Middle East Technical University
2000-2016    Member of Board of Trustees    Prof. Dr. Parlar Education and Research Foundation
1996-2000    Project Group Coordinator    Bilten (TÜBİTAK) Research Institute
1995-2001    Group Coordinator    Bilten (TÜBİTAK) Research Institute
1999-2000    Chairman of Board of Trustees    Prof. Dr. Parlar Education and Research Foundation
1995-1996    Asst. Director    Bilten (TÜBİTAK) Research Institute
1988-1989    Asst Dean    Faculty of Engineering METU
1985-1988    Asst. Head of Dept.    Electrical and Electronics Eng. Dept. Middle East Technical University

Consultancy Experience (Selected)

2012-2014    Investigation of factors controlling vector controlled drive performance    Aselsan A.Ş.
2007-2008    Hybrid Truck    Ford Motor Co.
2006-2008    Development of a  servo Drive    Aselsan A. Ş
2004-2006    Development of a drive controller for washing machine applications    KAREL A.Ş.
2003-            Development of a mobile X-ray generator    KANIT Radiology A.Ş.
2002-2003    Development of an induction cooker power supply    Komsa A.Ş.
1999-2002    High Frequency Power Supply    KOMSA A.Ş.
1998-1999    Design of a new Motor Series    ALARKO  A.Ş.
1992-1998    Motor Technology Development    TEE  A.Ş.
1995-1998    Electrical Drive for Electric Loco.    ASELSAN A.Ş.
1978-1992    Motor – Generator Design    ELSAN A.Ş.
1986-1988    Early Warning Systems    Civil Defence Directorate